EcooGraphix Automatic Carton Box Window Patching Machine
Model: ECOO RT-600
^∨• ^∨• ^∨• ^∨• ^∨• ^∨• ^∨• ^∨• ^∨• ^∨• ^∨• ^∨• ^∨• ^∨• ^∨• ^∨• ^∨• ^∨• ^∨• ^∨• ^∨• ^∨• ^∨• ^∨• ^∨• ^∨• ^∨• ^∨• ^∨• ^∨• ^∨• ^∨• ^∨• ^∨• ^∨• ^∨•
#1 Film material
Applicable to PET, PVC, PP, OPP, PE, Asha and even paper.
It can also be used for films with special effects such as light film, dumb film, flash film, colored film, printed film, UV filter film and fluorescent film.
^∨• ^∨• ^∨• ^∨• ^∨• ^∨• ^∨• ^∨• ^∨• ^∨• ^∨• ^∨• ^∨• ^∨• ^∨• ^∨• ^∨• ^∨• ^∨• ^∨• ^∨• ^∨• ^∨• ^∨• ^∨• ^∨• ^∨• ^∨• ^∨• ^∨• ^∨• ^∨• ^∨• ^∨• ^∨• ^∨•
#2 Specifications
| Model |
ECOO RT-600 |
| Max. Sheet size(W*L) |
520mm*600mm |
| Min. Sheet size(W*L) |
80mm*100mm |
| Max Window size(W*L) |
400mm*400mm |
| Min. Window size(W*L) |
30mm*45mm |
| Paper thickness |
Cardboard: 200gr/m²~2000gr/m²
Corrugated board: from micro-flute~6mm thickness |
| Film Thickness |
0.03-0.2um |
| Film material |
PET, PVC, PP, OPP, PE or paper |
| Accuracy |
(left/right)±0.5mm, (top/bottom)±1mm |
| Machine dimension |
4500mm*1500mm*1700mm |
| Machine weight |
3300kg |
| Main motor power |
3kw |
| Glue roller power |
0.09kw |
| Delivery motor power |
0.37kw |
Model ECOO RT-600
Max. Sheet size(W*L) 520mm*600mm
Min. Sheet size(W*L) 80mm*100mm
Max. Window size(W*L) 400mm*400mm
Min. Window size(W*L) 30mm*45mm
Paper thickness
Cardboard: 200gr/m²~2000gr/m²
Corrugated board: from micro-flute~6mm thickness
Film thickness 0.03-0.2um
Film material PET, PVC, PP, OPP, PE or paper
Accuracy (left/right)±0.5mm, (top/bottom)±1mm
Machine dimension 4500mm*1500mm*1700mm
Machine weight 3300kg
Main motor power 3kw
Glue roller power 0.09kw
Delivery motor power 0.37kw
^
∨• ^
∨• ^
∨• ^
∨• ^
∨• ^
∨• ^
∨• ^
∨• ^
∨• ^
∨• ^
∨• ^
∨• ^
∨• ^
∨• ^
∨• ^
∨• ^
∨• ^
∨• ^
∨• ^
∨• ^
∨• ^
∨• ^
∨• ^
∨• ^
∨• ^
∨• ^
∨• ^
∨• ^
∨• ^
∨• ^
∨• ^
∨• ^
∨• ^
∨• ^
∨• ^
∨•
#3 Introduction
Sizing Part(gluing)
The Gluing Section consists of the chrome-plated glue roller, glue separation plate, side guide and glue mould roller.
The Gluing Section can be easily pulled out ,it's easy to set and clean.
The glue separation plate is adjustable to control the glue area and amount.
In case of the machine shutdown, the cylinder will lift the glue roller and then the machine will be driven by the other separate motor, to avoid the leaking of the glue. Option of pre-make ready table is available, operator can set up the mould outside of the machine. It's convenient and time saving.
Paper Collecting Part(delivery stacker)
The belt at the Delivery Section is wide. Operator can adjust the height of the belt and the finished products are aligned in a straight line.
Belt speed can also be adjusted to be synchronized with the machine speed.
Feeder Part(paper feeding)
The machine is equipped with lower belt feeding system, with the choice of option which is pilling lifting system and belt lifting system.
The characteristic of the belt lifting system is high speed thus increasing capacity.
The characteristic of the pilling lifting system is that the feeding belt can be run continuously while boxes can go through the upward/downward movable pilling lifting system. This pilling lifting system is flexible in capable of feeding different boxes without scratching the boxes.
The feeding system design is an advance technology. Synchronous belt feeder is equipped with suction system. At the chain adjusting section there are four feeding chains. There is a feeding gate at the feeder which allows you to adjust upper rail without additional tool. This upper rail is made of flat steel and is connected to the middle part of the frame. This system is reliable which ensures the registration of all, cardboard and chain is accurate.
Even when there is serious jam, the position is precise and you can use micro-adjustment to adjust.
Window Patching Part
Boxes are delivered from the gluing section to the window patching section by suction.
Suction is run individually and registered by sensor. When there is blank sheet, the suction table will go down to avoid sticking of glue on the belt.
Operator can adjust the volume of suction air according to the size of the box.
The suction cylinder is made of special material. It is smooth so that the speed of patching is high and there will be no scratch on the plastic film.
When the knife cylinder is rolling, it intercrosses with another fixed knife bar and hence cutting the plastic film like "scissors". The cutting edge is flat and smooth.
The knife cylinder is with adjustable blowing or suction system to ensure the plastic film is patched on the window of the box accurately.
^∨• ^∨• ^∨• ^∨• ^∨• ^∨• ^∨• ^∨• ^∨• ^∨• ^∨• ^∨• ^∨• ^∨• ^∨• ^∨• ^∨• ^∨• ^∨• ^∨• ^∨• ^∨• ^∨• ^∨• ^∨• ^∨• ^∨• ^∨• ^∨• ^∨• ^∨• ^∨• ^∨• ^∨• ^∨• ^∨•
#4 Producing And Packaging
From producing to delivery, we make every details very carefully to guarantee the good product quality and service to customers.
^
∨• ^
∨• ^
∨• ^
∨• ^
∨• ^
∨• ^
∨• ^
∨• ^
∨• ^
∨• ^
∨• ^
∨• ^
∨• ^
∨• ^
∨• ^
∨• ^
∨• ^
∨• ^
∨• ^
∨• ^
∨• ^
∨• ^
∨• ^
∨• ^
∨• ^
∨• ^
∨• ^
∨• ^
∨• ^
∨• ^
∨• ^
∨• ^
∨• ^
∨• ^
∨• ^
∨•
#5 Certifications
^
∨• ^
∨• ^
∨• ^
∨• ^
∨• ^
∨• ^
∨• ^
∨• ^
∨• ^
∨• ^
∨• ^
∨• ^
∨• ^
∨• ^
∨• ^
∨• ^
∨• ^
∨• ^
∨• ^
∨• ^
∨• ^
∨• ^
∨• ^
∨• ^
∨• ^
∨• ^
∨• ^
∨• ^
∨• ^
∨• ^
∨• ^
∨• ^
∨• ^
∨• ^
∨• ^
∨•
#6 FAQ
1) What are your main products ?
A: Our main products are the Prepress CTP System(4up and 8up Online/Offline Thermal CTP, CTCP, VLF CTP and CTCP, Flexo CTP, Processor) and Post Press Packing Equipments(Laminating Machine, Foil Stamping and Die Cutting Machine, Paper Box Window Patching Machine, Book Binding Machine and so on) and the Printing Consumables(Offset Printing Plates, Inks, Printing Blankets, Plate Dot Densimeter) .
Our partners in USA, Canada, Mexico, Colombia, Turkey, Hungary, South Africa and so on. They are very pleased with our technician support service and product performance.
You can get the Pre-press and Post Press equipments and consumables all in one and no worry about the after-sales service from our company.
|
| |
2) Where is your factory ?
A: Our CTP machine factory is located in Hangzhou city, which is about 1.5 hours by train from Shanghai.
You are warmly welcome to visit our factory!
|
| |
3) What is your warranty for the CTPs ?
A: Three years' Laser Head and main spare parts for the CTPs, one year for the Processor.
|
| |
4) What is the Lead Time ?
A: Usually 20-30 days, and we will try our best to meet your demands.
|
| |
5) Can you also supply the Workflow and RIP ?
A: Yes, we can provide the Workflow Brain New and RIP Compose V9. Machine price does not include software.
|
| |
6) What about the installation and after-sales technician support ?
A: Our engineer can go to help the installation and provide the necessary training. The buyer should take the round air plane tickets, service charge and the local accommodation cost. Any problems or questions, we will be at your disposal 7x24 hours. Among our large amount of CTP installations worldwide, there are also many end users(printers) who have purchased the CTP products from EcooGraphix China directly and EcooGraphix technical service team support these installations remotely with regular on site visits.
These end users printers all run the CTP systems with full satisfaction due to our robust quality, seamless remote service, thorough training and maintenance. If you are a printer who is considering purchasing directly from EcooGraphix China, there is no hassle on installations, training and after sales service. We guarantee your satisfaction.
|
Audited Supplier 
){kind=link}
){kind=link}