Ecoo Automatic Foil Stamping and Die Cutting Machine

• Customization: Available
• Species: Die Cutting and Creasing Machine
• Imprinting Type: Platen
• Model NO.: ECOO-TDS800
• Placing Form of Template: Horizontal
• Die Cutting Tool: Steel Plate
• Computerized: Computerized
• Automatic Grade: Automatic
• Application: Paper Packaging Materials, Stickers Products, Heat Insulation Material
• Sheet Thickness: 0.2-2mm Cardboard E Flute Corrugated Paper
• Max. Sheet Size(mm): 800X580
• Min. Sheet Size(mm): 310X310
• Max. Die Cutting Size(mm): 790X570
• Max. Stamping Size(mm): 790X520
• Inside Chase Size(mm): 940X610
• Height of Cutting Rules(mm): 23.8
• Inter-Platen Distance(mm): 51.5
• Max. Stamping Speed(S/H): 5000
• Max. Machine Speed(Sheets/Hour): 7000
• Min. Gripper Margin(mm): 8
• The Thickness of Stamping Plate(mm): 5(Optional 4+1)
• Feeding Pile Height(mm): 1300
• Delivery Pile Height(mm): 1000
• Transport Package: Wooden Case
• Specification: 4900x2000x2000mm
• Trademark: EcooGraphix
• Origin: China
• HS Code: 84414000
• Production Capacity: 500 Sets/Year

Product Description

Product Description

800 Automatic Foil Stamping And Die Cutting Machine

 

Product Description

 

Brief Introduction:
Ecoo-790 automatic die-cutting & hot foil printing machine consists of a feeding unit, die-cutting unit, stamping unit, and delivery unit.
Non-stop feeding and delivery, and electrical control systems are available with the machine.
 

Application:

Suitable for the production of paper boxes, paper cups, wrapping labels, cardboard embossing, portable paper bags, paper covers, PVC, various plastics, etc.

 

Machine Spare Parts

 

Feeding Unit
• Pile tray with a handle allowing manual lateral correction of the pile during production
• Stream-wise feeding system with the highest speed of 120 sheets per minute
• 2 suction cups each for lifting paper, 2 suction cups for moving paper
• Height and angle of suction heads are easily adjustable
• Electronic safety devices preventing feeder pile from over ascending
• Micro-adjustment is available for transversal positioning of pile table
• Precision double-sheet detector
• Easy changeover of pull and push side guides simply by turning a bolt without the need to remove and replace the complete side guide
• 2 front guides with micro-adjustment and the side guide is adjustable by wheel handle
• Photo-electric detector with automatic stop system on feeding table in case of paper jam
• Separate drive controls of the feeding unit & the main machine for easy make-ready
• PLC and electronic cam for timing control

Die cutting Unit
• Siemens main motor controlled by Schneider inverter control
• Micro-adjustment of cutting force by worm gear driven by motor and controlled by touch screen
• The pressure accuracy can be up to 0.01mm
• Crankshaft made of 40Cr steel
• Machine frames made of Q235-A Steel, upper and lower platens made of QT60 ductile iron with resin-coated sand with Meehanite Die Cast Iron Technology
• Cutting chase turn-over device
• Overload protection device with torque limiter for the highest safety of the operator
and equipment
• 7 sets of gripper bars with grippers made of lightweight and durable aluminum
alloy with ultra-hard coat and anodized finish ensures accurate and consistent
paper registering
• After a long run test and delivered in pairs, the main gripper, chain from Subaki,
Japan
• High-pressure index drive system for gripper bar positioning control
• Pneumatic lock-up and release of cutting chase
• Centerline system for quick job changeover

Stamping unit
• The 2 longitudinal and 2 transversal hot stamping axes fully meet the customer's hot stamping needs for products.
• The uniform heating of 10 areas enables the product to show a more uniform hot stamping effect.
• PLC control servo system.

Delivery Unit
• Safety photo-electric devices preventing over-ascending and over-descending of delivery paper pile
• Adjustable depressor brush helps unload paper from grippers and pile up paper
• High pile design up to 1020mm
• Automatic auxiliary belt table available for non-stop delivery
• Feeder movement and speed control can be adjusted in the delivery unit

Electric Parts, Operator Interface, and Safety Detector
• The high-speed Japanese industrial Omron PLC system
• Omron operator interface with touchscreen
• Omron Electronic cam switch and encoder
• Electronic detectors, micro switched and photo-electric cells controlled by PLC on the entire machine

Automatic Lubrication System
• Automatic oil pump and distribution system for an entire machine with a preset timer
• Lubrication oil distribution for gripper chains with individually controllable valves for each chain

Safety Devices and Quality Approval of Components
• All electronic and electrical parts are CE-approved
• Overload protector for the protector and equipment
• Gripper chain clutch for the protection of gripper bars
• Emergency stop buttons on the entire machine for quick and easy access

 

Specification

 

Model	ECOO-TDS800
Max. Sheet Size(mm)	800x580
Min. Sheet Size(mm)	310x310
Max. die cutting size(mm)	790x570
Max. stamping size(mm)	790x520
Inside chase size(mm)	940x610
Height of cutting rules(mm)	23.8
Inter-platen distance(mm)	51.5
Max. pressure	200 tons
Min. gripper margin(mm)	8
Max. machine speed(sheets/hour)	7000
Max. stamping speed(s/h)	5000
The thickness of the stamping plate(mm)	5(optional 4+1)
Sheet thickness	0.2-2mm cardboard E flute corrugated paper
Feeding pile height(mm)	1300
Delivery pile height(mm)	1000
Electric heating system	10 zones
Stamping rolls	2 longitudinal and 2 transversal
Min. foil width(mm)	40
Foil reel core(mm)	25(1") 76(3")
Mine Motor(kW)	7.5
Total power(kW)	40
Air supply	0.8-1.0 MPa, ≥0.6cbm/min
Overall dimension(mm)	4900x2000x2000
Weight of machine(tons)	15

 

 

 

• Transmission of main unit adopts imported A/C frequency converter control, start-up and stop of the machine are controlled by means of imported air clutch

• Running of the whole machine is controlled by PLC. Interface touch-screen for monitoring machine running condition, trouble indications, and their corresponding shooting ways. This is more operator-friendly

• Independent temperature control of each heating zone makes the operation temperature of the machine more equal and stable. The function of timing pre-heating can enhance working efficiency greatly

 

Packaging & Shipping

 

 

 

More Details