Brief introduction
Model:
Thermal Paper Slitting and Rewinding Machine (With Pneumatic Unwinding Stand)
This model is designed to slit large thermal paler roll into small paper roll for POS application. It can slit print paper too,
Technical data:
| Model Type |
Ecoo-SLT-1100 |
| Max. Parent Web Width |
1100mm |
| Max. Parent Web Diameter |
1200mm |
| Max. Rewinding Diameter |
160mm |
| Min. Slit Width |
25mm |
| Max. Machine Speed |
150m/min |
| Unwinding Shaft |
3" Air Expanding Shaft |
| Rewinding Shaft |
0.5", 1" are available (or as request) |
| Voltage |
three-phase four-wire, 380V,50HZ |
| Power |
4 kw |
| Weight |
1750kg |
| Overall Dimensions(L*W*H) |
2214mm* 3000mm *1802mm |
| SPECIFICATIONS |
| Machine is used for slitting and rewinding all kinds of thermal paper, including fax paper, cash register paper, ATM paper, ECG paper, medical record paper, POS paper, self-adhesive trade marks, non-woven cloth, films etc. |
| Main |
| Machine adopts Siemens PLC control system and touch screen, all the parameters are displayed on the monitor, and it will automatic work. |
| The main motor adopts Siemens inverter motor, and frequency inverter control. |
| Machine adopts automatic pneumatic loading system. |
| All transmission rollers have been dynamic/static balance treated. |
| Machine adopts red line marking system, printing red line at the end of paper rolls. |
| Machine adopts round blades to slit, it equipped with automatic wasting materials edge trimming system. |
| It adopts auto tucker, adjust the paper material loose or tight easily. |
| It adopts fully automatic tension control controller to keep constant tension. |
| It adopts auto meter counter, when it reach the setup length, the machine stop and alarm automatically. |
| It can avoid of overlap problem after paper reels are finished. |
| It equipped with emergency switch. |
| Application Material |
- fax paper, cash register paper, ATM paper, ECG paper, medical record paper, POS paper, self-adhesive trade marks, non-woven cloth, films etc.
|
| Unwinding Section |
3''(76mm) air expanding shaft- Pneumatic loading system
- Guide & Slide AMT from Taiwan
- Magnetic Brake
- Web Guide System
|
| Slitting Section |
- Disc Cutter Assembly adopt the cam self-locking
- Cutter with adjustable and moveable blade base.
- Meter counter
|
| Rewinding Section |
- 0.5", 1", 1.5" 2" are available
- Pressure roller
- Auto Tucker
|
| Controlling Section |
- Siemens PLC & HMI
- All the parameters are displayed on the monitor
|
| Trimmed Waste |
- Edge Waste Blower with Expulsion Tube
|
| Red Line Mark System |
|
| Configuration |
| Name |
Model |
Pieces |
Remark |
| Computer System |
PLC+HMI |
1 set |
Siemens |
| Main motor |
|
1 set |
Siemens |
| Frequency inverter |
|
1 Piece |
Innovance from China |
| Air Pressure Valve |
|
1 set |
SMC |
| Cylinder |
|
2 Piece |
AIRTAC |
| Unwinding Shaft |
76mm Air Expanding Shaft |
1 Piece |
|
| Rewinding Shaft |
0.5'' 1'' or as your request |
2 Piece |
|
| Upper / Lower Knife |
|
16 sets |
|
| Tension Controller |
|
1 set |
|
| Sensor |
|
2 sets |
|
| Low Voltage Electrical Switch |
|
|
SCHNEIDER |
| Spacer |
As your request |
|
China |
| Magnetic Clutch |
|
1 set |
From Taiwan |
| Low Voltage Electrical Switch |
|
|
CHINT |
| Relay |
|
|
Omron |
Audited Supplier 
){kind=link}