800 Automatic Foil Stamping And Die Cutting Machine
Product Description
Brief Introduction:
Ecoo-790 automatic die cutting & hot foil printing machine is consisted of feeding unit, die-cutting unit, stamping unit and delivery unit.
Non-stop feeding and delivery, electrical control system are available with the machine.
Application:
Suitable for the production of paper boxes, paper cups, wrapping labels, cardboard embossing, portable paper bags, paper covers, PVC, various plastics, etc.
Machine Spare Parts
Feeding Unit
• Pile tray with handle allowing manual lateral correction of the pile during production
• Stream-wise feeding system with a highest speed of 120 sheets per minute
• 2 suction cups each for lifting paper, 2 suction cups for moving paper
• Height and angle of suction heads are easily adjustable
• Electronic safety devices preventing feeder pile from over ascending
• Micro-adjustment is available for transversal positioning of pile table
• Precision double-sheet detector
• Easy changeover of pull and push side guides simply by turning a bolt without the need of removing and replacing complete side guide
• 2 front guides with micro-adjustment and the side guide is adjustable by wheel handle
• Photo-electric detector with automatic stop system on feeding table in case of paper jam
• Separate drive controls of feeding unit & the main machine for easy make ready
• PLC and electronic cam for timing control
Die cutting Unit
• Siemens main motor controlled by Schneider inverter control
• Micro-adjustment of cutting force by worm gear driven by motor and controlled by touch screen
• The pressure accuracy can be up to 0.01mm
• Crank shaft made of 40Cr steel
• Machine frames made of Q235-A Steel, upper and lower platens made of QT60 ductile iron with resin coated sand with Meehanite Die Cast Iron Technology
• Cutting chase turn-over device
• Overload protection device with torque limiter for the highest safety of operator
and equipment
• 7 sets of gripper bars with grippers made of lightweight and durable aluminum
alloy with ultra hard coat and anodized finish ensure accurate and consistent
paper registering
• After long run test and delivered in pairs, main gripper, chain from Subaki,
Japan
• High pressure index drive system for gripper bar positioning control
• Pneumatic lock-up and release of cutting chase
• Centerline system for quick job changeover
Stamping unit
• The 2 longitudinal and 2 transversal hot stamping axes fully meet the customer's hot stamping needs for products.
• The uniform heating of 10 areas enables the product to show a more uniform hot stamping effect.
• PLC control servo system.
Delivery Unit
• Safety photo-electric devices preventing over-ascending and over-descending of delivery paper pile
• Adjustable depressor brush helps unloading paper from grippers and piling up paper
• High pile design up to 1020mm
• Automatic auxiliary belt table available for non-stop delivery
• Feeder movement and speed control can be adjusted in the delivery unit
Electric Parts, Operator Interface and Safety Detector
• The high speed Japanese industrial Omron PLC system
• Omron operator interface with touch screen
• Omron Electronic cam switch and encoder
• Electronic detectors, micro switched and photo-electric cells controlled by PLC on entire machine
Automatic Lubrication System
• Automatic oil pump and distribution system for entire machine with preset timer
• Lubrication oil distribution for gripper chains with individually controllable valve for each chain
Safety Devices and Quality Approval of Components
• All electronic and electrical parts are CE approved
• Overload protector for the protector and equipment
• Gripper chain clutch for the protection of gripper bars
• Emergency stop buttons on entire machine for quick and easy access
Specification
| Model |
ECOO-TDS800 |
| Max. Sheet Size(mm) |
800x580 |
| Min. Sheet Size(mm) |
310x310 |
| Max. die cutting size(mm) |
790x570 |
| Max. stamping size(mm) |
790x520 |
| Inside chase size(mm) |
940x610 |
| Height of cutting rules(mm) |
23.8 |
| Inter-platen distance(mm) |
51.5 |
| Max. pressure |
200 tons |
| Min. gripper margin(mm) |
8 |
| Max. machine speed(sheets/hour) |
7000 |
| Max. stamping speed(s/h) |
5000 |
| The thickness of stamping plate(mm) |
5(optional 4+1) |
| Sheet thickness |
0.2-2mm cardboard E flute corrugated paper |
| Feeding pile height(mm) |
1300 |
| Delivery pile height(mm) |
1000 |
| Electric heating system |
10 zones |
| Stamping rolls |
2 longitudinal and 2 transversal |
| Min. foil width(mm) |
40 |
| Foil reel core(mm) |
25(1") 76(3") |
| Mine Motor(kw) |
7.5 |
| Total power(kw) |
40 |
| Air supply |
0.8-1.0 MPa, ≥0.6cbm/min |
| Overall dimension(mm) |
4900x2000x2000 |
| Weight of machine(tons) |
15 |
• Transmission of main unit adopt imported A/C frequency converter control, start up and stop of the machine are controlled by means of imported air clutch
• Running of the whole machine is controlled by PLC. Interface touch-screen for monitoring machine running condition, trouble indications and their corresponding shooting ways. This is more operator-friendly
• Independent temperature control to each heating zone makes operation temperature of the machine more equal and stable. Function of timing pre-heating can enhance working efficiency greatly
Packaging & Shipping
More Details
FAQ
Q: What about the Installation and after-sales technician support?
A: Our engineer can go to help the installation and provide the necessary training. The buyer should take the round air plane tickets and service charge and the local accommodation cost. Any problems or questions, we will be at your disposal 7x24 hours.
Among our large amount of CTP installations worldwide, there are also many end users (printers) who have purchased the CTP products from EcooGraphix China directly and EcooGraphix technical service team support these installations remotely with regular onsite visits.
These end users Printers all run the CTP systems with full satisfaction due to our robust quality, seamless remote service, thorough training and maintanence. If you are a printer who is considering purchasing directly from EcooGraphix China, there is no hasle on installations, training and after sales service. We guarantee your satisfaction.
Audited Supplier 
){kind=link}