| Customization: | Available |
|---|---|
| After-sales Service: | Installation and Training and Trouble Shooting |
| Warranty: | 1 Year Warranty Including Spare Parts |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Model | ECOO-TDS790 |
| Max. Sheet Size(mm) | 790x560 |
| Min. Sheet Size(mm) | 310x210 |
| Max. die cutting size(mm) | 760x520 |
| Max. stamping size(mm) | 760x525 |
| Inside chase size(mm) | 780x530 |
| Height of cutting rules(mm) | 23.8 |
| Inter-platen distance(mm) | 51.5 |
| Max. pressure(N) | 120x104 |
| Stock range | Min. Sheet 90g/m², Cardboard 157-2000g/m²;E, B flute |
| Min. gripper margin(mm) | 6 |
| Max. machine speed(s/h) | 5500 |
| Max. stamping speed(s/h) | 5000 |
| The thickness of stamping plate(mm) | 5(optional 4+1) |
| Longitudinal feeding shafts | 3 |
| Transversal feeding shafts | 2 |
| Feeding pile height(mm) | 1200 |
| Delivery pile height(mm) | 950 |
| Electric heating system | 8 zones |
| Min. foil width(mm) | 40 |
| Foil reel core(mm) | 25(1") 76(3") |
| Rated power(kw) | 26 |
| Air supply | 0.8-1.0 MPa, ≥0.6m3/min |
| Overall dimension(mm) | 3855x3650x2210 |
| Weight of machine(kg) | 8500 |
Transmission of main unit adopt imported A/C frequency converter control, start up and stop of the machine are controlled by means of imported air clutch Running of the whole machine is controlled by PLC. Interface touch-screen for monitoring machine.
Running condition, trouble indications and their corresponding shooting ways. This is more operator-friendly.
Independent temperature control to each heating zone makes operation temperature of the machine more equal and stable. Function of timing pre-heating can enhance working efficiency greatly
Automatic stamping machines are commonly used for general packaging, such as label hot stamping, card hot stamping, food packaging hot stamping, etc.
The automatic stamping machine TDS790 is one of the best-selling products, especially in Europe. Yawa has sold many sets across Europe, such as the UK, Romania, Croatia, Portugal, Bulgaria, and the Czech Republic.
Die cutting Section
· Precision worm gear crank toggle driving system ensures smooth and dynamic lower platen movement
· Precision stationery upper platen
· Optional 4+1m cutting plate
· Chase locking by hand
· Pneumatic clutch/brake for main drive system
· Motorized automatic impression adjustment
· high precision alloy gripper bar
· Reasonable gap on two ends of gripper bar to realize good gripper bar registration at positions of gripping sheet and before die cutting by means of front and back clamper-lays.
· High quality gripper bar driving chain
· State-of-the-art 2 cam index gripper bar driving system to ensure smooth and precise gripper bar intermittent movement
· Torque limit safety clutch to protect the index driving system in case of gripper bar crash
· Double cam driven gripper opener and front lay swing frame with position restore spring for smooth and accurate sheet register and take off
· Air blasting nozzle bar for stretching the thin paper before die cutting
Foil Stamping System
· Five servo motor driven foil pull shafts, each individually programmable for short step and long foil stepping 3 axes in longitudinal directions; 2 axes in transversal direction.
· Stamping console with industrial pc, Pro-Face touch screen and 6 thermometers for foil setting and temperature control with machine pre-heating timer
· To 3 foil pulling shafts in longitudinal direction, waste foil is rewound through three tension adjustable torque motors
· To 2 foil pulling shafts in transversal direction, waste foil is rewound by means of timing belts driven by foil pulling servo motors
· Heating base with 6 heating zone each temperature individually adjustable
· 24 hours preheating device
· Warning system for foil length
· Foil separating air blaster with air volume, blasting strength per zone and starting and ending time adjustment
· Thin paper stretching air blaster with air volume, blasting strength per zone and starting and ending time adjustment
From producing to delivery, we make every details very carefully to guarantee the good product quality and service to customers.
1. what about the payment term?
Normally, 30% deposit, 70% before shipping, or LC at sight.
2. What is the Lead Time ?
Usually 30-40 days, and we will try our best to meet your demands.
3. What about the Installation and After-sales technician support ?
Our engineers are all can go to help the installation and provide the necessary training. The buyer should take the round air tickets and service charge and the local accommodation cost. Any problems or questions, we will be at your disposal 7x24 hours.
4.Do you have any other products?
We also offer other postpress machines for package and label printing companies, like UV coating machine, laminating machine, window patching machine, carton inkjet printing machine and digital label printing machine, thermal paper slitting machine.
){kind=link}