Ecoographix Automatic Window Patching Machine

• Customization: Available
• After-sales Service: Installation and Training and Trouble Shooting
• Warranty: 1 Year (Excluding High Consumable Parts)
• Model NO.: Ecoo RT-600
• Application: Packaging Paper
• Driven Type: Electric
• Automatic Grade: Automatic
• Membrane Material: PET Film
• Plastic Film Mulching Modes: Hot Laminating
• Performance: Waterproof
• Stickup Accuracy: (Left/Right)+/-0.5mm; (Top/Bottom)+/-1mm
• Sizing Roller Power: 0.09kw
• Delivery Stacker Power: 0.37kw
• Transport Package: Plywood Box
• Specification: L)4500*(W)1500*(H)1700 mm
• Trademark: EcooGraphix
• Origin: China
• HS Code: 844230
• Production Capacity: 500sets/Year

Product Description

 

Product Description

Ecoographix Automatic Window Patching Machine For Packaging
 

Product Description

Film Material
 

Applicable to PET, PVC, PP, OPP, PE, Asha, and even paper. It can also be used for films with special effects such as light film, dumb film, flash film, colored film, printed film, UV filter film, and fluorescent film.       

 

 

Specification

 

Model	RT-600
Max. sheet size (mm)	600*520
Min. sheet size (mm)	100*80mm
Max. window size (mm)	400*400
Min. window size (mm)	45*30mm
Paper thickness	Cardboard 200-2000g/m^2 ; corrugated board: from micro-flute-6mm thickness
Film thickness	0.03-0.2um
Stickup accuracy	(left/right)±0.5mm, (top/bottom)±1mm
Machine size(L*W*H)	4500*1500*1700
Net weight	3300kg
Main power	3kw
Sizing roller power	0.09kw
Delivery stacker power	0.37kw

 

Machine Spare Parts

Sizing Part (gluing):

The Gluing Section consists of the chrome-plated glue roller, glue separation plate, side guide, and glue mold roller.
The Gluing Section can be easily pulled out, it's easy to set and clean.
The glue separation plate is adjustable to control the glue area and amount.
In case of the machine shuts down, the cylinder will lift the glue roller and then the machine will be driven by the other separate motor, to avoid the leaking of the glue.
The option of a pre-make ready table is available, The Operator can set up the mold outside of the machine. It's convenient and time-saving.
 

Paper Collecting Part (delivery stacker)
 

The belt at the Delivery Section is wide. The operator can adjust the height of the belt and the finished products are aligned in a straight line.
The belt speed can also be adjusted to be synchronized with the machine speed.
 

Feeder Part (paper feeding)
 

The machine is equipped with a lower belt feeding system, with the choice of option which is a pilling lifting system or belt lifting system.
The characteristic of the belt lifting system is high speed thus increasing capacity.
The characteristic of the pilling lifting system is that the feeding belt can be run continuously while boxes can go through the upward/downward movable pilling lifting system. This pilling lifting system is flexible in capable of feeding different boxes without scratching the boxes.
The feeding system design is an advanced technology. The synchronous belt feeder is equipped with a suction system. At the chain adjusting section there are four feeding chains.
There is a feeding gate at the feeder which allows you to adjust the upper rail without additional tools. This upper rail is made of flat steel and is connected to the middle part of the frame.
This system is reliable which ensures the registration of all, cardboard and chain is accurate.
Even when there is a serious jam, the position is precise and you can use micro-adjustment to adjust.
 

Window Patching Part
 

Boxes are delivered from the gluing section to the window patching section by suction.
Suction is run individually and registered by the sensor. When there is a blank sheet, the suction table will go down to avoid sticking of glue on the belt.
The operator can adjust the volume of suction air according to the size of the box.
The suction cylinder is made of special material. It is smooth so that the speed of patching is high and there will be no scratch on the plastic film.
When the knife cylinder is rolling, it intercrosses with another fixed knife bar hence cutting the plastic film like "scissors". The cutting edge is flat and smooth.
The knife cylinder has an adjustable blowing or suction system to ensure the plastic film is patched on the window of the box accurately.
 

Producing And Packaging

More Details

FAQ

1. Where is your company?
Our company is located in Hangzhou city, which is 1 hour by train from Shanghai. 

2. What about the Installation and after-sales technician support?
Our engineer will go to help with the installation and will provide the necessary training on-site. (The buyer should take the round airplane tickets and service charge and the local accommodation cost). Any problems or questions, we will be at your disposal 7x24h.