Non-Stop Paper Feeding System Automatic Multi-Function Laminator

• Warranty: 1 Year Warranty Including Spare Parts
• Max. Laminating Width (mm): 1080
• Laminating Speed (M/Min): 10-60
• Max. Sheet Wxl (mm): 1080X950
• Min. Sheet Wxl (mm): 350X350
• Paper Thickness (GSM): 100-500
• Model NO.: ECOO-MTM 108E
• Film Thickness (M): 10-25
• Total Power (Kw): 63-68
• Transport Package: Standard Exporting Package: Polywood Carton
• Specification: Machine Dimension LxWxH (mm): 10204x2366x2900
• Trademark: EcooGraphix
• Origin: China
• Production Capacity: 500 Set/Year

Product Description

Non-stop Paper Feeding System Automatic Multi-function Laminator





Model: ECOO-MTM 108E

 

In order to satisfy for customers' high demands of laminating technology, our engineers team devote years to researching and testing, and combined with the characteristic of the best laminating technology in Europe, and finally launch the new automatic laminating machine with advanced technology. The outstanding features are with high speed, high quality, saving electricity and environment-friendly.
 

○ △ • ▽ ○ △ • ▽ ○ △ • ▽ ○ △ • ▽  Product Introduction  ▽ • △ ○ ▽ • △ ○ ▽ • △ ○ ▽ • △ ○
 

*The machine is suitable for using water-based glue, solvent-based glue, and thermal film.

*Cold-water non-curling system: The paper will be non-curling after separated.

*Low cost: Ceramic anilox roller coating, minimize gluing amount to 5g/sqm.

*The heating energy cycle drying system makes the whole machine power consumption about 30kw/h.

*High efficiency: The machine working speed reaches to 70m/min, 10000sheets/h.





○ △ • ▽ ○ △ • ▽ ○ △ • ▽ ○ △ • ▽  Specification  ▽ • △ ○ ▽ • △ ○ ▽ • △ ○ ▽ • △ ○
 

MODEL	MTM-108E	MTM-130E	MTM-145E
Max. laminating width (mm)	1,080	1,080	1,080
Max. sheet W×L (mm)	1,080x950	1,080x1,300	1,080x1,450
Min. sheet W×L (mm)	350x350	350x350	350x350
Paper thickness (gsm)	100-500	100-500	100-500
Film thickness (µm)	10-25	10-25	10-25
Laminating speed (m/min)	10-60	10-60	10-60
Machine Dimension L×W×H (mm)	10,204×2,366×2,900	10,300×2,366×2,900	12,994×2,366×2,900
Machine weight (kgs)	8,500	9,500	10,200
Total power (kw)	63-68	63-68	63-68

 

MODEL
MTM-108E

Max. laminating width (mm)
1,080

Max. sheet W×L (mm)
1,080x950

Min. sheet W×L (mm)
350x350

Paper thickness (gsm)
100-500

Film thickness (µm)
10-25

Laminating speed (m/min)
10-60

Machine Dimension L×W×H (mm)
10,204×2,366×2,900

Machine weight (kgs)
8,500

Total power (kw)
63-68
 

○ △ • ▽ ○ △ • ▽ ○ △ • ▽ ○ △ • ▽  Remarks  ▽ • △ ○ ▽ • △ ○ ▽ • △ ○ ▽ • △ ○


Laminating speed depend on paper weight, film thickness and gule material quality.
Subject to change without notice.

○ △ • ▽ ○ △ • ▽ ○ △ • ▽ ○ △ • ▽  Configuration  ▽ • △ ○ ▽ • △ ○ ▽ • △ ○ ▽ • △ ○

 

Standard Configuration 1. Automatic Feeder    2. Non-stop Feeding Device 3. Pre-loading Device 4. Laminating Host 5. Automatic Sheeter 6. Automatic Delivery 7. Powder Removing Device

Selectable Configuration   1. Cold Water Non-curling System 2. Hot Knife  3. Anti-static System

○ △ • ▽ ○ △ • ▽ ○ △ • ▽ ○ △ • ▽  Main Features  ▽ • △ ○ ▽ • △ ○ ▽ • △ ○ ▽ • △ ○

 
 

Automatic Feeder

- Max. pile height: 1100mm
- Equipped with pneumatic drying vacuum pump, no need for oil
- Equipped with side lay and front lay for accurate paper position registration
- Safety device: emergency stop, overrun safety device for feeder pile
- PLC program circuit control, control panel, and security system
- Non-stop paper feeding system can feed paper continuously without machine stop and hence reduce the cost of film

Powder Removal System

- Remove powder on the surface of the printed sheets effectively;
- Adopt vertical electrical heating and plated chrome roller;
- This system can also enhance the brightness of lamination and save glue at the same time.
 

Laminator

- Equipped with hot oil recycle system mounted outside the machine which can keep temperature constantly;
- Accurate grinding mirror cylinder ensures the good coating brightness;
- Wide range of temperature setting which can reach Max. 180^oC;
- This machine is suitable for the gluing of lamination film without glue, thermal film and BOPP f- Mirror cylinder and hot water cylinder with build-in heating system and temperature controller;
- Film tension controller can handle the tension problem of heated film.
 

Electromagnetic Energy-saving System

- Adopts ceramic roller with independent drive motor;
- Translational doctor can adjust rapidly and it makes glue uniformity;
- It is suitable for water-based glue and solven-based glue;
- Pneumatic pressure roller controls film tension;
- Equipped with one flush trimmer which can transfer film to hot water cylinder smoothly. Film will not be curled.

 
 

Automatic Non-stop Delivery

- Non-stop delivery and waving stacker;
- Chain hanged paper pile;
- Pneumatic sheet jogging device knocking up both sides of sheet and photo cell controlled, it makes the sheet more tidily;
- Conveyor table with suction belt.
 

 
 

Electrical parts

- Adopts PLC automatic control. Display breakdown signal detector and indicator;
- Provide system data when required and follow up the schedule of production;
- Display of production speed, quantity of sheets, drying temperature, lamination speed and accumulative total number of sheets.
 

○ △ • ▽ ○ △ • ▽ ○ △ • ▽ ○ △ • ▽  Producing And Packaging  ▽ • △ ○ ▽ • △ ○ ▽ • △ ○ ▽ • △ ○


From producing to delivery, we make every details very carefully to guarantee the good product quality and service to customers.
 

 

 

 

○ △ • ▽ ○ △ • ▽ ○ △ • ▽ ○ △ • ▽  Certificates  ▽ • △ ○ ▽ • △ ○ ▽ • △ ○ ▽ • △ ○

 

 

 

 

○ △ • ▽ ○ △ • ▽ ○ △ • ▽ ○ △ • ▽  FAQ  ▽ • △ ○ ▽ • △ ○ ▽ • △ ○ ▽ • △ ○

 

Q1: What are your main products ? 

A: Our main products are the Prepress 4up and 8up Online/Offline Thermal CTP, CTCP, VLF CTP, Flexo CTP, Processor, Offset Plates, Offset Inks, Offset Printing Blankets, Postpress Packing Equipment and so on.

You can get the equipment and consumables all in one and no worry about the after-sales service from our company.
 

Q2: Where is your factory ? 

A: Our CTP Processor machine factory is in Shanghai, you are warmly welcome to visit our factory!
 

Q3: What is your warranty for the CTPs ?

A: Three years' Laser Head and main spare parts for the CTPs, one year for the Processor.

If the customer uses EcooGraphix CTP plate with the CTP machine, we will provide the Lifetime Warranty.
 

Q4: Can you also supply the Workflow and RIP ?

A: Yes, we can provide the Workflow Brainnew and RIP Compose V12.
 

Q5: What about the installation and after-sales technician support ?
 

A: Our engineer can go to help the installation and provide the necessary training. The buyer should take the round air plane tickets, service charge and the local accommodation cost. Any problems or questions, we will be at your disposal 7x24 hours. Among our large amount of CTP installations worldwide, there are also many end users(printers) who have purchased the CTP products from EcooGraphix China directly and EcooGraphix technical service team support these installations remotely with regular onsite visits.

These end users printers all run the CTP systems with full satisfaction due to our robust quality, seamless remote service, thorough training and maintanence. If you are a printer who is considering purchasing directly from EcooGraphix China, there is no hassle on installations, training and after sales service. We guarantee your satisfaction.