| Warranty: | 1 Year Including All Spare Parts |
|---|---|
| Classification: | Single-blade Cutter |
| Driven Type: | Electric |
| Type: | Industrial Cutter |
| Blade Material: | Steel |
| Computerized: | Computerized |
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier 
| Servo Precision High Speed Sheet Cutter | |
| Model | ECOO HSC-1400 |
| Cutting type | The up knife cut reciprocally and the down knife is fixed. |
| Applicable range of paper | 50-550g |
| Max. paper roll diameter | 1800mm |
| Max. paper-cutting width | 1400mm |
| Range of cutting length | 400-1450mm |
| Cutting sheet number | 2 sheet |
| Cutting precision | Cutting length < 1000mm: ± 0.3mm ± 0.05% for cutting paper length >1000mm |
| Max. cutting speed | 400cuts/min |
| Max. cutting meter speed | 300m/min |
| Max. paper stacking height | 1500mm |
| Air pressure source requirement | 0.8Mpa |
| Design power | 380V, 28kw, 3Phase, 50Hz |
| Gross weight | 13000kg reference |
| 12000*4300*2400mm | |
|
Slitting knife
Three sets of slitting knife is used to trim and middle slitting.
|
|
Cutting unit
On the knife the British cutter method to reduce the load and noise when the cutter extend cutter life. On knife roller body to steel welding gave precision machining, and dynamic balance adjustment, effectively reduce the vibration and noise of the high-speed operation.
Under the knife: knife block with cast iron integrally molded casting, precision machining, good stability. The back cutter: made of special steel precision knife processing, long life blade easily adjustable. |
|
Electronic control(the Yaskawa servo and Siemens PLC)
TPC7062KS and Yaskawa Processor communication, mainly used in the production of data input equipment operating status monitoring, and system failure alarm indication. The rotating series drives Yaskawa the JAPAN company Yaskawa I quick drive, based on the production of man-machine interface input parameters from the actual speed traction roller encoder feedback and accurate positioning.
|
|
Curly Device
Curly device is in the paper roll before slitting device to eliminate the roll curl or fold device, in order to the stability of the paper roll tension. The paper roll first passes through(to the edge of the roll) components into the deconvolution device, the rollers are guide roll.
|
|
The new Anti curvature device
Effectively remove the curl of the roll to make the paper more flat, more conducive the paper roll tension stability.
|
|
Unwinded stand
Type: double arm type for paper core 3"6"12" Roll Rack
2 unwinds pick-up type located at the rear of the machine structurally sized to be able to hold reel of a weight approximately 1500kgs. The up and down movements are all hydraulic and are directly controlled from the console by selectors that control the solenoid valves. Oil pressure to control the paper arm before and after closing and moving and lifting. Lifting movement capable of stable and rapid, more simple and convenient operation.
|
|
The conveyor and paper collection system by jogger
Conveyor system with mult-stage: from high speed to low speed. First to separate the cut paper quickly, and then overlap the paper, then collect and pile the paper.
Lift stacked set paper sets, the paper stack to a considerable height, that is automatically dropped. The stacker table has three sides shake finishing function, the side of the motor to drive the paper, the paper,on both sides by high-quality motor jogger to adjust the amplitude of the paper manually to improve the simplicity and safety of the operation.
|
|
Squareness adjustment system(Auto Prismatic adjustment system for paper):
Adjust squareness of paper, our engineer will fix it by once, and operator no need to readjust.
|
|
Adjust The Angle Automaticlly(paper aligning system)
The precision of the stepper motor is controlled by the length of the cut precision screw adjustment the inclination of the knife group, to effectively ensure the straight angle of the edge of the cut sheer, reducingwaste time manually adjust the angle of error rate and adjustment.
|
|
Automatic paper jam stop:
Have sensor to give signals to the system if there are any paper jam occur at conveyor, and the machine will stop immediately to save the papers.
|
|
Automatic marking machine:
With precise count after insert marking, operators only need to input on the man-machine interface to after the number of paper, can be in accordance with the settings to marking the quantity of paper.
|
| Configuration | Type | Note | |
| 1 | Paper cutting knife | Tungsten steel knife blade | Germany |
| 2 | Bearing | FAG/ NSK | Germany/ Japan |
| 3 | Vibrator | K20 | China |
| 4 | PLC | Siemens | Germany |
| 5 | Limit switch | Schneider | France |
| 6 | Controller | Kinco | China |
| 7 | Relay | Schneider/ RXM4LB2BD | France |
| 8 | Servo drive | Yaskawa | Japan |
| 9 | Frequency transformer | Inovance | China |
| 10 | Servo motor | Yaskawa | Japan |
| 11 | Encoder | NEMICON HES-25-2MD | Japan |
| 12 | Control button | Eaton | USA |
| 13 | Switch power supply | Mingwei NES-50-24 | Taiwan |
| 14 | Web guide | Arise | Taiwan |
| 15 | Screen | Siemens | Germany |
| 16 | Ac contactor | Eaton | USA |
| 17 | Conveyor belt | Rapplon | Sweden |
| 18 | Automatic tension system | Germany Siemens PLC control, Germany COSYS proportional valve, AW20-02BG air filter control, DBK250.2 Brake |
| Parts name | No. |
| Cut knife | 1 set |
| Belt | 15 pcs |
| Pressure gauge | 1 pc |
| Marking paper | 40 rolls |
| Brake pad | 4 pcs |
| Up slitting knife | 3 pcs |
| Down slitting knife | 1 pc |
| Rubber ring | 16 pcs |
| Regulating Valve | 1 pc |
| Limit switches | 2 pcs |
| Handle M12 | 1 pc |
| O-ring for cylinder | 1 pc |
| Synchronous belt | 1 pc |
| Toolbox | 1 set |
Q1: What are your main products ?
A: Our main products are the Prepress 4up and 8up Online/Offline Thermal CTP, CTCP, VLF CTP, Flexo CTP, Processor, Offset Plates, Offset Inks, Offset Printing Blankets, Postpress Packing Equipment and so on.
You can get the equipment and consumables all in one and no worry about the after-sales service from our company.
Q2: Where is your factory ?
A: Our CTP Processor machine factory is in Shanghai, you are warmly welcome to visit our factory!
Q3: What is your warranty for the CTPs ?
A: Three years' Laser Head and main spare parts for the CTPs, one year for the Processor.
If the customer uses EcooGraphix CTP plate with the CTP machine, we will provide the Lifetime Warranty.
Q4: Can you also supply the Workflow and RIP ?
A: Yes, we can provide the Workflow Brainnew and RIP Compose V12.
Q5: What about the installation and after-sales technician support ?
A: Our engineer can go to help the installation and provide the necessary training. The buyer should take the round air plane tickets, service charge and the local accommodation cost. Any problems or questions, we will be at your disposal 7x24 hours. Among our large amount of CTP installations worldwide, there are also many end users(printers) who have purchased the CTP products from EcooGraphix China directly and EcooGraphix technical service team support these installations remotely with regular onsite visits.
These end users printers all run the CTP systems with full satisfaction due to our robust quality, seamless remote service, thorough training and maintanence. If you are a printer who is considering purchasing directly from EcooGraphix China, there is no hassle on installations, training and after sales service. We guarantee your satisfaction.
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}