1060mm Format Water-Based UV Varnish Overall and Spot Coating Machine

• Customization: Available
• After-sales Service: on Site Installation, Training
• Warranty: 1 Year (Excluding High Consumable Parts)
• Model NO.: ECOO SD-1060W
• Type: Separate Polishing Machine Polishing
• Form: Dedicated Machine
• Coating Paint: Solvent Evaporation Coating
• Coated Glazing Type: Printed Coated Glazing
• Glazing Product: Spot and Overall
• Application: Paper Printed, Paperboard
• Tile Type: Colored Glaze
• Input Mode: Automatic
• Max.Sheet Size: 730X1060mm
• Min.Sheet Size: 310X406mm
• Max.Coating Size: 720X1050mm
• Max Coating Thickness: 0.025mm
• Speed: 9000 Sheets/Hour
• Sheet Thickness: 80-500GSM
• Power: Max 44kw
• Transport Package: Standard Exporting Package: Polywood Carton
• Specification: 10460*2725*1930 mm
• Trademark: EcooGraphix
• Origin: China
• Production Capacity: 300 Sets Per Year

Product Description

1060mm Format Water-based UV Varnish Overall and Spot Coating Machine

 

 

Product Description

 

The High Speed UV Spot and Overall Coating machine SD1060W adopts upper-sway gripper-pass-sheet method to enable max speed up to 9500 sheets/hour.
UV curing system with Teflon conveying belt has characteristic of higher speed, precise orientation and UV curing higher efficiency and lower power consumption.
It is used for both thick and thin papers, and can be used for both full and partial UV varnish coating or water based varnish coating.

 

Parts and Functions:

Feeder

Enlarged feeder with four sucking and four forwarding suckers and air blowing for spool can feed sheet easily and smoothly.
In case of double sheet or multi-sheet misalignment, the feeding action will be stopped emergently.
 

 

Front and Side Paper registration

There are two sensors to reflect on the sheet-transferring table. When meeting with sudden sheet feeding stop, the sensors will feel it and the impression will automatically retreat and diminish the pressure and U.V. lamp will transfer to half lamp to light to avoid sheet burning.
 

 

Varnish Coating Supply

Anilox roller and doctor blade design control by varnish consumption and volume to meet the demand of products and operate easily. (Varnish consumption and volume are determined by LPI of ceramic anilox roller)
 

 

Transferring Unit

After sheet is transferred from pressure cylinder to gripper, air volume blowing for paper can support and reverse sheet smoothly, which can prevent sheet surface from being scratched.
 

 

IR Drying

There are double IR drying units with 24 IR tubes, for drying the water based varnish.
Divided into four groups of separate switches, freely take the power saving mode.
The lower suction by the conveying Teflon belt , makes the water evaporation fast, sheet varnishing more gloss.
 

 

UV Curing

UV Curing is for the UV varnishing, with 3 separate UV lamps, better for power saving.
Temperature switch is installed in the U.V. lamp chamber (box), such as when there being malfunction or over-heat in lamp chamber, the temperature will switch off automatically.
Perfect pumping device can pump the ozone out of the factory to avoid operator breathing in too much ozone and leads to bad health. On the other hand, lamp tubes can be cooled for long time using.
 When the paper feeding is stopped, the UV lamp will automatically half lamp and enter the power saving mode.
 

 

Conveying Unit

By the lower suction, the conveying Teflon mesh belt to convey paper, with the automatic deviation correction device, so that thick and thin paper can be conveyed stably and smoothly.
 

 

Sheet Delivery

Automatic pneumatic patting sheet controlled by photoelectric detecting sensor make sheet pile fall automatically and collect sheet neatly.    Electronic control can take out sheet sample safely and quickly for inspecting.
 

 

Specification

Model	Ecoo SD-1060W
Max.sheet size	730x1060mm
MIN.sheet size	310X406mm
Max.coating size	720x1050mm
Sheet thickness	80-500gsm
Coating registration accuracy	±0.2mm
Production speed	9000sheets/hour
Weight	8T
Dimension	10460x2725x1930mm
Power	44KW
Remark: Production speed depending on sheet weight, size and quality

 

Standard equipment

Auto Feeder
Multifunctional Coating Unit
Double IR Drying Units
UV Curing System
Auto Delivery Unit
Auto Control
 

Optional Units

Non-stop Feeding and Delivery System including the Preloading Trolley
Preloading Trolley
Ceramic Anilox Roller with Chamber Blade 
Ceramic Anilox Roller
Remote Monitoring
 

Installations worldwide

There are hundreds of the varnish coating machines installed worldwide, about 60sets in China, 60sets in Thailand , Netherlands,Greece,Turkey, Egypt,Peru, Mexico, Colombia and many in other countries, too.
 

 

Bron Group, the Largest Finishing company in Netherworld/Holland installed and running SD1060W UV spot varnishing machine beginning 2023, satisfied with everything.

 

FAQ

1. What is your warranty?
Normally 1 year.

2. What is the Lead Time?
Usually 45 days, and we will try our best to meet your demands.

3. What about the Installation and after-sales technician support?
Our engineer can go to help the installation and provide the necessary training. The buyer should take the round air plane tickets and service charge and the local accommodation cost. Any problems or questions,we will be at your disposal 7x24 hours.