Automatic Die Cutting Machine with Waste Stripping

• Customization: Available
• After-sales Service: 1 Year Warranty
• Warranty: 1 Year Warranty
• Model NO.: TD 800S
• Species: Die Cutting and Creasing Machine
• Imprinting Type: Rotary
• Placing Form of Template: Horizontal
• Die Cutting Tool: Steel Plate
• Computerized: Computerized
• Automatic Grade: Automatic
• Application: Paper Packaging Materials, Stickers Products
• Classification: Die Cutting Machine
• Max. Sheet Size(mm): 800 × 580
• Min. Sheet Size(mm): 310 × 310
• Max. Die Cutting Size(mm): 790× 570
• Inside Chase(mm): 940 × 610
• Min.Gripper Margin(mm): 8
• Sheet Thickness(mm): 0.2-2mm Cardboard
• Max.Pressure(T): 200
• Max.Machine Speed(S/H): 7000
• Feeding Pile Height(mm): 1300
• Delivery Pile Height(mm): 1000
• Total Power: 15kw
• Dimension(mm): 4900 X 2000 X 2000
• Weight(T): 14.5
• Transport Package: Standard Exporting Package: Polywood Carton
• Specification: 4900 x 2000 x 2000
• Trademark: EcooGraphix
• Origin: China
• Production Capacity: 500 Sets/ Year

Product Description

 

Automatic Die Cutting Machine With Waste Stripping

 

 

 

Product Parameters

 

Automatic Die Cutting Machine
Model	TD 800S
Max. Sheet size(mm)	800 × 580
Min. Sheet size(mm)	310 × 310
Max. Die cutting size(mm)	790× 570
Inside chase(mm)	940 × 610
Min.gripper margin(mm)	8
Sheet thickness(mm)	0.2-2mm cardboard E flute corrugated paper
Max.pressure(T)	200
Max.machine speed(s/h)	7000
Feeding pile height(mm)	1300
Delivery pile height(mm)	1000
Total power	15kw
Dimension(mm)	4900 x 2000 x 2000
Weight(T)	14.5

 

Devices and components

 

Feeding Unit

• Pile tray with handle allowing manual lateral correction of the pile during production
• Stream-wise feeding system with a highest speed of 120 sheets per minute
• 2 suction cups each for lifting paper, 2 suction cups for moving paper
• Height and angle of suction heads are easily adjustable
• Electronic safety devices preventing feeder pile from over ascending
• Micro-adjustment is available for transversal positioning of pile table
• Precision double-sheet detector
• Easy changeover of pull and push side guides simply by turning a bolt without the need of removing and replacing complete side guide
• 2 front guides with micro-adjustment and the side guide is adjustable by wheel handle
• Photo-electric detector with automatic stop system on feeding table in case of paper jam
• Separate drive controls of feeding unit & the main machine for easy make ready
• PLC and electronic cam for timing control

Diecutting Unit

• Siemens main motor controlled by inverter control
• Micro-adjustment of cutting force by worm gear driven by motor and controlled by touch screen
• The pressure accuracy can be up to 0.01mm
• Crank shaft made of 40Cr steel
• Machine frames made of Q235-A Steel, upper and lower platens made of QT60 ductile iron with resin coated sand with Meehanite Die Cast Iron Technology
• Cutting chase turn-over device
• Overload protection device with torque limiter for the highest safety of operator and equipment
• 7 sets of gripper bars with grippers made of lightweight and durable aluminum alloy with ultra hard coat and anodized finish ensure accurate and consistent paper registering
• After long run test and delivered in pairs, main gripper, chain from Subaki, Japan
• High pressure index drive system for gripper bar positioning control
• Pneumatic lock-up and release of cutting chase
• Centerline system for quick job changeover

Stripping Unit

• 3-action movement structure with upper, middle and lower stripping frame to facilitate die change
• Stripping pins or male/female die can be used for different stripping jobs
• Match with the centerline registration system in the diecutting section, the same system also apply to the stripping system to minimize changeover time. Accurate positioning can increase production efficiency
• The up/down movement of upper stripping frame is controlled by motor which makes adjustment easier

Delivery Unit

• Safety photo-electric devices preventing over-ascending and over-descending of delivery paper pile
• Adjustable depressor brush helps unloading paper from grippers and piling up paper
• High pile design up to 1020mm
• Automatic auxiliary belt table available for non-stop delivery
• Feeder movement and speed control can be adjusted in the delivery unit

Electric Parts, Operator Interface and Safety Detector

• The high speed Japanese industrial Omron PLC system
• Omron operator interface with touch screen
• Omron Electronic cam switch and encoder
• Electronic detectors, micro switched and photo-electric cells controlled by PLC on entire machine

 

Certifications

The image below showcases the certification of our product.

 

Packaging & Shipping

The image below showcases the packaging of our product.

 

Our Customers

 

 

 

FAQ

1. Warranty & Support

• One-Year Warranty: Covers defects in materials and workmanship (excluding consumables such as blades and mats).

• Lifetime Remote Service Support: Enjoy ongoing remote technical assistance for the entire lifespan of the product.

2. Certifications

• Compliant with international standards: CE, ISO, SGS certified.

3. Installation & Training

• Onsite Engineer Support: Available upon request. Buyer covers flight and hotel expenses for a 5-day onsite service.

• Comprehensive Training: Includes detailed guidance on machine operation and maintenance to ensure optimal performance.

4. Lead Time

• Approximately 30 working days after receipt of payment.

5. Payment Terms

• 50% Downpayment: Required to confirm the order.

• 50% Balance Payment: Due before shipment.